Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-07-28Identity
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
| Identity | |
| Brand | ![]() |
| Product Number | HSD62001 |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
6.0V
138.90 oz-in
10.00 kg-cm
1.0 N-m
4.8V
111.10 oz-in
8.00 kg-cm
0.8 N-m
|
| Speed |
6.0V
0.07 sec/60°
857.1 deg/s
142.9 RPM
4.8V
0.09 sec/60°
666.7 deg/s
111.1 RPM
|
| Running Current | (add) |
| Stall Current | (add) |
| Shaft Power | 2.28–3.67 W |
| Physical | |
| Weight | 1.84 oz52.2 g |
| Dimensions |
L 1.64 in W 0.82 in H 1.47 in L 41.7 mm W 20.8 mm H 37.3 mm |
| Case Material | (add) |
| Drivetrain | |
| Motor Type | Coreless |
| Motor Drive | (add) |
| Gears | Titanium |
| Gear Spline/Teeth | 25 T estimate |
| Rotation Mode | (add) |
| Rotation/Support | Dual Bearings |
| Backlash | (add) |
| Control & Signal | |
| Modulation | Digital |
| Direction | (add) |
| Rotational Range | (add) |
| Mechanical Limit | (add) |
| Pulse Cycle | (add) |
| Pulse Width | (add) |
| Neutral Position | (add) |
| Dead Band | (add) |
| Refresh Rate | (add) |
| Angle Sensor | (add) |
| Control System | (add) |
| Programmable | (add) |
| Signal Voltage | (add) |
| Electrical & Environment | |
| Operating Voltage | (add) |
| Power Source | (add) |
| Regulator Type | (add) |
| Temperature | (add) |
| Water Rating | (add) |
| Certification | (add) |
| Idle Current | (add) |
| Connectivity | |
| Connector | (add) |
| Wire Length | (add) |
| Origin | |
| Country of Origin | (add) |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Quick Actions
Similar Active Servos
Reviews (3)
-
Cielo
March 1, 2019Application(s): i used it as tail servo for my 30size hirobo Scale Lama... i use 2s lipo pack for my rx with a 6v regulator output.. Sadly, after hovering (3ft) a mimute or so, this servo gave up.. Tail spins up on one side causing me to flick the throttle cut switch. So lucky i did'nt crash my precious Lama .. Lol!!? When i check.the servo, it was too hot, not only warm but damn hot and gears all locked up.. So i was thinking if this sevo really can do the job at 6v.
Comments: i expected more great performance on this servo....but i got less.
BladeScraper
August 15, 2016Application(s): Throttle servo, 700N
Comments: Works great for throttle and can be had for ridiculous cheap used. No complaints here
toptrex
September 4, 2010Application(s): tail servo
Comments: Very good servo but the ds650 is so much better have them on all my helicopters.
