Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-10-26| Identity | |
| Brand |  |
| Product Number | FT5614M |
| Category | Hobby |
| Discontinued | Yes |
| Performance | |
| Torque |
8.4V
201.40 oz-in
14.50 kg-cm
1.4 N-m
7.4V
168.00 oz-in
12.10 kg-cm
1.2 N-m
|
| Speed |
8.4V
0.11 sec/60°
545.5 deg/s
90.9 RPM
7.4V
0.13 sec/60°
461.5 deg/s
76.9 RPM
|
| Physical | |
| Weight | 1.98 oz56.0 gAbove Average |
| Dimensions |
L 1.583 in W 0.787 in H 1.52 in L 40.2 mm W 20.0 mm H 38.6 mm |
| Drivetrain | |
| Motor Type | Coreless |
| Gears | Metal |
| Rotation/Support | Dual Bearings |
| Control & Signal | |
| Modulation | Digital |
| Direction | Counterclockwise |
| Rotational Range | 120° |
| Pulse Width | 900-2100 µs |
| Control System | PWM |
| Programmable | Yes |
| Electrical & Environment | |
| Operating Voltage | 6–8.4 V |
| Connectivity | |
| Connector | JR (Universal) estimate |
| Wire Length | 300 mm11.81 in |
| Origin | |
| Country of Origin | China |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Weight | Above Average Lighter than 73% of 1879 Digital Standard servos |
Performance Analysis
| Shaft Power | 2.39–3.39 W |
| Power Density | 1.788 W/in³ More power-dense than 38% of 1768 Digital Standard servos |
| Torque Density | 3.0000 oz-in/g |
| Torque-to-Volume Ratio | 88.72 oz-in/in³ |
| Speed-to-Weight | 0.13736 (1/sec·g) |
| Speed-Torque Trade-off | 21.84 |
| Voltage Range Width | 2.4 V Wider voltage range than 62% of 1560 Digital Standard servos |
Similar Active Servos
Reviews (3)
-
meee
June 27, 2022Application(s): 1\10 monster truck revo 3.3
Comments: ran for 5 runs and died is junk
Oleg
October 8, 2016Application(s): All for 24cc gas
Comments: In addition to the previous review I want to add the following information.
Servos PERFECTLY works with a transmitter Taranis X9D+ and receiver X8R!Oleg
July 1, 2016Application(s): Profile Extra 330 20cc
Comments: I bought a servo Feetach FT 5614M here
http://ru.aliexpress.com/item/FEETECH-Digital-Metal-Gear-HV-Servo-Heat-Sink-RC-Car-Boat-On-Off-Road-FT5614M/32648238874.html
Unfortunately, it has many problems.
1. https://www.youtube.com/watch?v=xl8hgTIC0eg
2. https://www.youtube.com/watch?v=FI-b_rAKH60
3. https://www.youtube.com/watch?v=TflTh2zcWMg
4. https://www.youtube.com/watch?v=biCyW3Wft0k
Servo fast running to one side and slowly - in the other.
I'm RC modeler more than 15 years. All control linkages, hinges, horns installed without backlash and friction.
I checked the all servos on different voltages (5v, 6v, 8.4v) - defect manifested at any voltage.
Another defect - servos creak and squeak (video №4)
Use these servo not possible on the aircraft models or helicopter models. Only for landing gear.