Discover XQ-Power Servos in Our eBay Store!
Shop Now
Technical Specifications
Last Updated: 2026-09-13
Weight
Dimensions
Torque
Speed
Current
Temp
Wire
| Identity | |
| Brand |  |
| Product Number | 31422S |
| Category | Hobby |
| Performance | |
| Torque |
6.0V
57.00 oz-in
4.10 kg-cm
0.4 N-m
4.8V
46.00 oz-in
3.31 kg-cm
0.3 N-m
Below Average
|
| Speed |
6.0V
0.16 sec/60°
375.0 deg/s
62.5 RPM
4.8V
0.21 sec/60°
285.7 deg/s
47.6 RPM
Below Average
|
| Running Current |
6.0V
0.180 A
180 mA
4.8V
0.150 A
150 mA
Above Average
|
| Stall Current | 0.6–0.8 A600–800 mATop 10% |
| Physical | |
| Weight | 1.60 oz45.4 gAverage |
| Dimensions |
L 1.598 in W 0.78 in H 1.437 in L 40.6 mm W 19.8 mm H 36.5 mm |
| Case Material | Plastic |
| Drivetrain | |
| Motor Type | 3-pole |
| Gears | Nylon | Plastic |
| Gear Spline/Teeth | 24 T |
| Shaft Size | 6.0 mm |
| Rotation Mode | Positional |
| Rotation/Support | Dual Bearings |
| Backlash | 0.500° |
| Control & Signal | |
| Modulation | Analog |
| Direction | Clockwise |
| Rotational Range | 120° |
| Mechanical Limit | 180° |
| Pulse Cycle | 20 ms |
| Pulse Width | 900-2100 µs |
| Neutral Position | 1500 µs |
| Dead Band | 5 µs |
| Refresh Rate | 50 Hz |
| Angle Sensor | Potentiometer |
| Control System | PWM |
| Programmable | No |
| Signal Voltage | 3-5V |
| Electrical & Environment | |
| Operating Voltage | 4.8–6 V |
| Power Source | Direct |
| Regulator Type | Direct |
| Temperature | -20–60 °C-4–140 °F |
| Water Rating | IP4X |
| Idle Current | 0.008 A8 mA |
| Connectivity | |
| Connector | JR (Universal) |
| Wire Length | 300 mm11.81 in |
Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.
Class Comparison
| Torque | Below Average Stronger than 27% of 196 Analog Standard servos at 4.8V |
| Speed | Below Average Faster than 24% of 193 Analog Standard servos at 4.8V |
| Weight | Average Lighter than 61% of 452 Analog Standard servos |
| Running Current | Above Average Lower draw than 85% of 49 Analog Standard servos at 4.8V |
| Stall Current | Top 10% Lower draw than 91% of 65 Analog Standard servos |
Performance Analysis
| Shaft Power | 0.41–0.66 W |
| Power Density | 0.368 W/in³ More power-dense than 26% of 440 Analog Standard servos |
| Torque Density | 1.0132 oz-in/g Stronger than 16% of 196 Analog Standard servos |
| Torque-to-Volume Ratio | 25.68 oz-in/in³ Denser torque than 25% of 196 Analog Standard servos |
| Speed-to-Weight | 0.10489 (1/sec·g) Faster than 37% of 193 Analog Standard servos |
| Speed-Torque Trade-off | 9.66 Better balanced than 31% of 193 Analog Standard servos |
| Current-per-Torque Ratio | 0.0174 A/oz-in More efficient than 62% of 56 Analog Standard servos |
| Idle-to-Running Current Ratio | 0.053 Lower idle draw than 42% of 37 Analog Standard servos |
| No-Load vs Stall Current Spread | 5.33 Narrower current spread than 76% of 35 Analog Standard servos |
| Torque Gain per Volt | 19.93%/V More voltage-responsive (torque) than 75% of 150 Analog Standard servos |
| Speed Gain per Volt | 26.05%/V More voltage-responsive (speed) than 96% of 151 Analog Standard servos |
| Voltage Range Width | 1.2 V Wider voltage range than 60% of 236 Analog Standard servos |
| Backlash-to-Range Ratio | 0.00417 Tighter backlash than 43% of 38 Hitec servos |
| Dead-Band-to-Pulse-Width Ratio | 0.0042 Finer dead band than 42% of 51 Analog Standard servos |
Similar Active Servos
Reviews (1)
-
geo
March 14, 2019Application(s): robot
Comments: juste ulisié pour un projet scolaire