Discover XQ-Power Servos in Our eBay Store!

Shop Now
Standard Discontinued

Hitec HS-5925MG

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-09-14
Identity
Brand Hitec
Product Number 35925S
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 127.80 oz-in
4.8V 102.80 oz-in Below Average
Speed
6.0V 0.08 sec/60°
4.8V 0.10 sec/60° Above Average
Running Current
6.0V 0.240 A
4.8V 0.190 A Average
Physical
Weight 1.97 ozAbove Average
Dimensions L 1.55 in
W 0.78 in
H 1.48 in
Drivetrain
Motor Type Coreless
Motor Drive MOS
Gears Metal
Gear Spline/Teeth 24 T estimate
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Direction Clockwise
Rotational Range 80°
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 1 µs
Refresh Rate 200 Hz
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Signal Voltage 3-5V
Electrical & Environment
Operating Voltage 4.8–6 V
Temperature -20–60 °C
Water Rating Waterproof
Idle Current 0.003 A
Connectivity
Connector JR (Universal)
Wire Length 220 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueBelow Average
Stronger than 19% of 1060 Digital Standard servos at 4.8V
SpeedAbove Average
Faster than 79% of 1045 Digital Standard servos at 4.8V
WeightAbove Average
Lighter than 75% of 1880 Digital Standard servos
Running CurrentAverage
Lower draw than 56% of 226 Digital Standard servos at 4.8V

Performance Analysis

Shaft Power 1.90–2.95 W
Power Density1.651 W/in³
More power-dense than 35% of 1768 Digital Standard servos
Torque Density1.8423 oz-in/g
Stronger than 18% of 1053 Digital Standard servos
Torque-to-Volume Ratio57.45 oz-in/in³
Denser torque than 19% of 1058 Digital Standard servos
Speed-to-Weight0.17921 (1/sec·g)
Faster than 84% of 1038 Digital Standard servos
Speed-Torque Trade-off10.28
Better balanced than 14% of 1034 Digital Standard servos
Idle-to-Running Current Ratio0.016
Lower idle draw than 89% of 167 Digital Standard servos
Torque Gain per Volt20.27%/V
More voltage-responsive (torque) than 78% of 873 Digital Standard servos
Speed Gain per Volt20.83%/V
More voltage-responsive (speed) than 84% of 874 Digital Standard servos
Voltage Range Width1.2 V
Wider voltage range than 22% of 1560 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0008
Finer dead band than 91% of 504 Digital Standard servos

Similar Active Servos

Reviews of Hitec HS-5925MG

Be the first to review!

Submit a review of Hitec HS-5925MG