Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HS-605BB
Standard Discontinued

Hitec HS-605BB

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-09-14
Identity
Brand Hitec
Product Number 31605S
Category Hobby
Discontinued Yes
Performance
Torque
6.0V 94.40 oz-in
4.8V 76.40 oz-in Average
Speed
6.0V 0.13 sec/60°
4.8V 0.17 sec/60° Above Average
Physical
Weight 1.73 ozAverage
Dimensions L 1.59 in
W 0.77 in
H 1.57 in
Drivetrain
Motor Type 3-pole
Gears Plastic
Gear Spline/Teeth 24 T estimate
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Analog
Direction Clockwise
Rotational Range 90°
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 8 µs
Angle Sensor Potentiometer
Control System PWM
Electrical & Environment
Operating Voltage 4.8–6 V
Temperature -20–60 °C
Idle Current 0.008 A
Connectivity
Wire Length 300 mm

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

TorqueAverage
Stronger than 51% of 157 Analog Standard servos at 4.8V
SpeedAbove Average
Faster than 68% of 156 Analog Standard servos at 4.8V
WeightAverage
Lighter than 47% of 430 Analog Standard servos

Performance Analysis

Shaft Power 0.83–1.34 W
Power Density0.699 W/in³
More power-dense than 62% of 421 Analog Standard servos
Torque Density1.5592 oz-in/g
Stronger than 47% of 157 Analog Standard servos
Torque-to-Volume Ratio39.75 oz-in/in³
Denser torque than 48% of 157 Analog Standard servos
Speed-to-Weight0.12005 (1/sec·g)
Faster than 60% of 156 Analog Standard servos
Speed-Torque Trade-off12.99
Better balanced than 49% of 156 Analog Standard servos
Torque Gain per Volt19.63%/V
More voltage-responsive (torque) than 72% of 121 Analog Standard servos
Speed Gain per Volt25.64%/V
More voltage-responsive (speed) than 96% of 122 Analog Standard servos
Voltage Range Width1.2 V
Wider voltage range than 59% of 186 Analog Standard servos
Dead-Band-to-Pulse-Width Ratio0.0067
Finer dead band than 11% of 37 Analog Standard servos

Similar Active Servos

Reviews (2)

  • Chris

    December 2, 2016

    Application(s): These servos are unlike the typical servo, they have Properly Shimed Helical Gears. These servos have Ball Bearing inside. My servo stopped working but the mounts were still good, so i pulled the gears and stuck them into a ha-422 that had broken mounts from a an old crash... just letting you know that this works the helical gears fit into a 422.

    Comments: Being that I have servos that could just about break this servo in half... i give it a 4 because of the cool helical gearing.

  • LASER200

    May 10, 2016

    Application(s): USE THEM IN 40% LASER ON ALE. AND ELE. BEEN BUYING THEM SINCE 1998 NEVER HAD A FAILURE

    Comments: HITEC ARE GREAT SERVOS

Submit a review of Hitec HS-605BB