Discover XQ-Power Servos in Our eBay Store!

Shop Now
Hitec HSR-5995TG
Standard Discontinued

Hitec HSR-5995TG

Compatible Hardware

*Spec is estimated from brand data.

Technical Specifications

Last Updated: 2026-09-16
Identity
Brand Hitec
Product Number 35995S
Category Hobby
Discontinued Yes
Performance
Torque
7.4V 416.61 oz-in
6.0V 333.29 oz-in
Speed
7.4V 0.12 sec/60°
6.0V 0.15 sec/60°
Stall Current 4.2–5.2 ABelow Average
Physical
Weight 2.17 ozAverage
Dimensions L 1.57 in
W 0.79 in
H 1.50 in
Drivetrain
Motor Type Coreless
Motor Drive MOS
Gears Titanium
Gear Spline/Teeth 24 T estimate
Shaft Size 5.8 mm
Rotation Mode Positional
Rotation/Support Dual Bearings
Control & Signal
Modulation Digital
Direction Clockwise
Rotational Range 180°
Pulse Cycle 20 ms
Pulse Width 900-2100 µs
Neutral Position 1500 µs
Dead Band 2 µs
Angle Sensor Potentiometer
Control System PWM
Programmable Yes
Electrical & Environment
Operating Voltage 4.8–6 V
Temperature -20–60 °C
Water Rating Water Resistant
Idle Current 0.003 A
Connectivity
Connector S
Wire Length 300 mm
Origin
Country of Origin South Korea

Disclaimer: Most data is sourced from the manufacturer. Some data is sourced from our loyal community and with the help of AI. We aim for accuracy but are not responsible for inaccurate information.

Class Comparison

WeightAverage
Lighter than 55% of 1902 Digital Standard servos
Stall CurrentBelow Average
Lower draw than 22% of 539 Digital Standard servos

Performance Analysis

Shaft Power 4.11–6.42 W
Power Density3.450 W/in³
More power-dense than 65% of 1759 Digital Standard servos
Torque Density5.4194 oz-in/g
Torque-to-Volume Ratio179.15 oz-in/in³
Speed-to-Weight0.10840 (1/sec·g)
Speed-Torque Trade-off49.99
Current-per-Torque Ratio0.0156 A/oz-in
Voltage Range Width1.2 V
Wider voltage range than 21% of 1539 Digital Standard servos
Dead-Band-to-Pulse-Width Ratio0.0017
Finer dead band than 45% of 468 Digital Standard servos

Similar Active Servos

Reviews of Hitec HSR-5995TG

Be the first to review!

Submit a review of Hitec HSR-5995TG