Discover XQ-Power Servos in Our eBay Store!
Shop NowMost Viewed Servos (25)
Performance
Physical
Drivetrain
Control & Signal
Electrical & Environment
Connectivity
Origin
Preferences are saved automatically.
Make: TowerPro
Stall Current: 1.4–2.5 A1400–2500 mA
Shaft Power: 1.27–1.88 W
Weight: 1.94 oz55.0 g
Make: TowerPro
Stall Current: 0.36–0.7 A360–700 mA
Shaft Power: 0.39–0.64 W
Weight: 0.32 oz9.0 g
Make: Feetech
Stall Current: 2–2.7 A2000–2700 mA
Shaft Power: 2.09–40.85 W
Weight: 1.94 oz55.0 g
Make: TowerPro
Stall Current: 1–1.2 A1000–1200 mA
Shaft Power: 1.21–1.77 W
Weight: 1.94 oz55.0 g
Make: Futaba
Stall Current: 0.43–0.5 A430–500 mA
Shaft Power: 0.35–0.55 W
Weight: 1.31 oz37.0 g
Make: SpringRC
Stall Current: 0.8–1 A800–1000 mA
Shaft Power: 0.21–0.31 W
Weight: 0.35 oz9.9 g
Make: TowerPro
Stall Current: ≤0.7 A≤700 mA
Shaft Power: 0.46–0.71 W
Weight: 0.47 oz13.4 g
Make: Feetech
Stall Current: ≤4.2 A≤4200 mA
Shaft Power: 9.66 W
Weight: 2.63 oz74.5 g
Make: EMAX
Stall Current: 0.9–1.1 A900–1100 mA
Shaft Power: 0.32–0.52 W
Weight: 0.42 oz12.0 g
Make: PTK
Stall Current: 1–1.6 A1000–1600 mA
Shaft Power: 0.89–2.13 W
Weight: 0.46 oz13.0 g
Quick Tips
- Models with an asterisk (*) have been discontinued.
- Click on any servo model name to see more details about that product.
- Click on any brand name to filter all servos for that brand.
- In the desktop view, click on any column header to sort the table by that attribute. Click again to reverse the order.
Compare Prices for
Recent Reviews
-
September 7, 2026
Servo: Airtronics/ Sanwa 94102Z
Application(s):
Comments: O melhor standart de todos os tempos... Não fazem mais coisas assim, feitos para durarem décadas, muito superiores a qualquer futaba s3003/3004 . Qualidade de engrenagens/caixa de resina e potenciômetro de primeira linha. Desmonten e analisem .
Mike
August 5, 2026Servo: Hitec D485HW
Application(s): Kaos rc plane
Comments: Servo failed on 5th flight. Fortunately on landing. Had it failed in the air my new plans built kaos would have been badly damaged or destroyed
Daveflyr
May 5, 2026Servo: Hyperion DS16-FCD
Application(s): Normal f3a aerobatic 40/50 size model.
Comments: A beautiful and powerful small servo, great resolution and the power is incredible for its Size..
Random name
April 5, 2026Servo: TowerPro MG90
Application(s): Not installed
Comments: This is a 16 year late review.
Complete junk. I bought 6 of them in 2010 and all of them are faulty. All of them jitters, jumps, shakes no matter the power supply or the receiver. Any other servo in the same setup works perfectly (even full sized ones).
(I just found the box I stored them in because I put them into storage because all of them were faulty. Re-tested them 16 years later with completely a different setup and they are still faulty. As an experiment I swapped a few control boards from other servos into these and it works perfectly afterwards. So for some reason the control boards these uses are crap.)nevermind
February 23, 2026Servo: Emax ES3001
Application(s): 40 size glow trainer plane
Comments: They have a non-standard servo arm spline
As the servo spline is a nonstandard size it does NOT fit Futaba or HiTec servo arms. Emax does not even specify what the spline is! Forget using any arms you have. Forget replacing a Futaba servo in any car or plane as the servo arms will have to be replaced as well. Such a pain. These servo can only be used with the few low quality servo arms included with the servo making these servo much much less useful.